Finishing Kit

June 30, 2012

The Canopy Fairing - 3.0 hrs.

Today I finished applying the remaining 4 layers of glass and epoxy to the canopy fairing. After cutting new glass strips, I mixed up some epoxy resin, and pigment (LOTS this time!) and went to work. Here's the right side, after I was all finished.

Looking across the center:

And finally, the left side:

I tipped up the canopy at this point and climbed back inside the cabin once again for a look. All looks good this time! So almost a week later, I'm back where I was then. I hate backtracking. I'm anxious to get on with it and get this finished.

<< Previous | Home | Next >>

Contact me: swayze "at" (replace "at" with the @ sign... no spaces... you know the deal)