November 6, 2008

Deburring, filing, and finishing parts - 2.0 Hrs.

Yesterday I drilled two holes in the F-706G brackets while they were clecoed in place on the bulkhead. Now I need to cut out the material between the holes to make a nice smooth slot.

So I clamped the bracket in the vice and used my dremel tool to cut the slot. Then, some filing and smoothing finished the part.

Here are both brackets, finished and ready to prime. In fact, all the parts for the F-705 are now ready for scuffing, cleaning and priming.

<< Previous | Home | Next >>

Contact me: swayze "at" europa.com (replace "at" with the @ sign... no spaces... you know the deal)