December 2, 2008

Riveted the F-707, 708, 710, 711, and 712 together - 2.5 Hrs.

Yippee! Today could be called "fun with my squeezer" day. I was able to use my rivet squeezer on all these rivets. I got all the remaining bulkheads riveted together, as you can see below. Snap bushings installed, too. All that's left is to drill the blocks for the flap bearings on the F-705, and the bulkheads are finished.

<< Previous | Home | Next >>

Contact me: swayze "at" europa.com (replace "at" with the @ sign... no spaces... you know the deal)