June 28, 2009

Riveted the F-729 Bellcrank Channel to Aft Fuse Floor - 2.0 hrs.

I started riveting today! I was able to finish riveting the F-729 Bellcrank Channel and Tru-Trak servo bracket to the floor of the aft fuse, and the end of the channel to the F-707 bulkhead inside.

The rivets all look good. Solo riveting worked out fine here.

Inside, I was able to squeeze the middle rivet, but the top and bottom ones couldn't be reached with the squeezer. Daniel came out and helped me rivet them.

<< Previous | Home | Next >>

Contact me: swayze "at" europa.com (replace "at" with the @ sign... no spaces... you know the deal)